The reset pim routing-table command clears interface status of the specified PIM routing entry.
reset pim routing-table group groupAddr mask { group-mask-length | group-mask-addr } source sourceAddr interface { oif-port-type oif-port-num | oif-port-name }
reset pim vpn-instance vpn-instance-name routing-table group groupAddr mask { group-mask-length | group-mask-addr } source sourceAddr interface { oif-port-type oif-port-num | oif-port-name }
| Parameter | Description | Value |
|---|---|---|
| groupAddr |
Specifies the group address of a PIM entry. |
The value ranges from 224.0.0.0 to 239.255.255.255, in dotted decimal notation. |
| mask |
Specifies mask. |
- |
| group-mask-length |
Specifies the mask length of a multicast group address. |
The value is an integer that ranges from 4 to 32. |
| group-mask-addr |
Specifies the mask of a multicast group address. |
The value ranges from 128.0.0.0 to 255.255.255.255, in dotted decimal notation. |
| source sourceAddr |
Specifies the source address of a PIM entry. |
The value is in dotted decimal notation. If the specified PIM entry is an (*, G) entry, the source address is 0.0.0.0. |
| interface oif-port-name |
Specifies the name of an interface. |
The value is a string of 1 to 63 case-sensitive characters, spaces not supported. |
| oif-port-type |
Specifies the type of an interface. |
- |
| oif-port-num |
Specifies the number of an interface. |
The value is a string of 1 to 63 case-sensitive characters, spaces not supported. |
| vpn-instance-name |
Specifies the name of a VPN instance. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. The VPN instance name cannot be _public_. When double quotation marks are used around the string, spaces are allowed in the string. |
Usage Scenario
Clearing PIM status of the downstream interfaces may trigger the sending of corresponding Join/Prune messages, which affects multicast services.
Using this command can clear join information about illegal users and stop data forwarding on the specified downstream interfaces. Using this command only can clear the PIM status of the specified interface in a specified PIM entry. The command cannot be used to clear the IGMP and static group join status on a specified interface and the status of the entries generated through the BGP protocol. If vpn-instance is not specified, PIM status of the downstream interface of a specified PIM entry in the public network instance is cleared.