Usage Scenario
The display traffic-statistics vsi command allows you to check VPLS PW traffic statistics. To check VPLS PW traffic statistics collected within a specific period of time, you need to clear the previous traffic statistics by running the reset traffic-statistics vsi peer command.
Depending on the signaling protocol used by VPLS, traffic statistics collection on VPLS networks can be collected in either LDP or BGP-AD mode. Therefore, you can set the parameter in this command based on the VPLS signaling protocol.Prerequisites
The traffic-statistics enable or traffic-statistics peer command must have been run in the VSI-LDP view, if you want to checkLDP VPLS PW traffic statistics.
Configuration Impact
After the reset traffic-statistics vsi peer command is run, all the previous statistics on the specified PW are cleared.