The reset access statistics packet discard mac-spoofing command clears statistics about MAC-spoofing-dropped packets of access users.
The reset access statistics packet discard urpf command clears statistics about URPF-dropped packets of access users.
This command is supported only on the NetEngine 8000 F1A.
Parameter | Description | Value |
---|---|---|
mac-spoofing |
Clears statistics about MAC-spoofing-dropped packets of access users. |
- |
urpf |
Clears statistics about URPF-dropped packets of access users. |
- |
ipoe |
Clears statistics about URPF-dropped packets of IPoX users. |
- |
pppoe |
Clears statistics about URPF-dropped packets of PPPoX users. |
- |
ipv4 |
Clears statistics about MAC-spoofing-dropped IPv4 packets. |
- |
ipv6 |
Clears statistics about MAC-spoofing-dropped IPv6 packets. |
- |
interface-type interface-number |
Specifies the type and number of an interface. |
- |
slot slot-id |
Specifies a slot ID. |
- |
Usage Scenario
Before collecting statistics about MAC-spoofing-dropped packets over a specified period, run the reset access statistics packet discard mac-spoofing command to clear the existing statistics.
Before collecting statistics about URPF-dropped packets over a specified period, run the reset access statistics packet discard urpf command to clear the existing statistics.Configuration Impact
Statistics about MAC-spoofing-dropped packets cannot be restored after they are cleared. Exercise caution when running this command.
Statistics about URPF-dropped packets cannot be restored after they are cleared. Exercise caution when running this command.Precautions
In VS mode, this command is supported only by the admin VS.