reset access statistics flow interface

Function

The reset access statistics flow interface command clears statistics about user packets based on a specified BAS interface and VPN instance.

This command is supported only on the NetEngine 8000 F1A.

Format

reset access statistics flow interface { interface-name | interface-type interface-number } [ vpn-instance vpn-instance-name ]

Parameters

Parameter	Description	Value
vpn-instance vpn-instance-name	Specifies the name of a VPN instance.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported.
interface interface-type interface-number	Specifies the type and number of an interface.	-

Parameter

Description

Value

vpn-instance vpn-instance-name

Specifies the name of a VPN instance.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported.

interface interface-type interface-number

Specifies the type and number of an interface.

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
bras-control	execute

Usage Guidelines

Usage Scenario

If multiple users bound to VPN instances exist on a BAS interface, you can run the display access statistics interface command to check statistics about user packets and users. If a large number of such historical statistics exist on the device, it is inconvenient for analysis. To clear statistics about user packets based on a specified BAS interface and VPN instance, run the reset access statistics flow interface command. Then you can run the display access statistics interface command to view new statistics.

Precautions

The cleared statistics cannot be restored. Therefore, exercise caution when you perform this operation.

In VS mode, this command is supported only by the admin VS.

Example

# Clear statistics about user packets of the VPN instance named 123 on GigabitEthernet 0/1/1.

<HUAWEI> reset access statistics flow interface GigabitEthernet 0/1/1 vpn-instance 123