reset ip-pool max-ratio domain

Function

The reset ip-pool max-ratio domain command clears statistics about IP address pool usage in all domains on the device.

This command is supported only on the NetEngine 8000 F1A.

Format

reset ip-pool max-ratio domain

Parameters

None

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ippool	write

Usage Guidelines

Usage Scenario

After an address pool is bound to a domain, IP addresses in the address pool are assigned to users in the domain for login and released upon user logout. To check IP address usage in all domains and determine whether bound IP address pools need to be adjusted, run the display ip-pool max-ratio domain command to check the current and historical maximum IP address pool usage. To clear statistics about IP address pool usage in all domains on the device, run the reset ip-pool max-ratio domain command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Clear statistics about IP address pool usage in all domains on the device.

<HUAWEI> reset ip-pool max-ratio domain