reset ip-pool max-usage domain

Format

reset ip-pool max-usage [ domain [ domain-name ] ]

Parameters

Parameter	Description	Value
domain domain-name	Specifies a domain name.	The value is a string of 1 to 64 characters.

Parameter

Description

Value

domain domain-name

Specifies a domain name.

The value is a string of 1 to 64 characters.

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ippool	execute

Usage Guidelines

Usage Scenario

Before collecting statistics on the historical maximum usage of addresses in an IPv4 address pool, run the reset ip-pool max-usage domain command to clear the existing statistics. Then the statistics displayed in the display ip-pool max-usage command output will be accurate.

Statistics on the historical maximum usage of addresses in an IPv4 address pool cannot be restored after they are cleared. Exercise caution when running the reset ip-pool max-usage command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Clear the historical maximum usage of addresses in all domains.

<HUAWEI> reset ip-pool max-usage domain