reset ip-pool max-usage pool

Function

The reset ip-pool max-usage pool command clears the historical maximum usage of addresses in an IPv4 address pool.

This command is supported only on the NetEngine 8000 F1A.

Format

reset ip-pool max-usage pool [ pool-name ]

Parameters

Parameter	Description	Value
pool pool-name	Specifies an address pool.	The value is a string of 1 to 128 case-insensitive characters.

Parameter

Description

Value

pool pool-name

Specifies an address pool.

The value is a string of 1 to 128 case-insensitive characters.

Views

User view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ippool	execute

Usage Guidelines

Usage Scenario

Before collecting statistics on the historical maximum usage of addresses in an IPv4 address pool, run the reset ip-pool max-usage command to clear the existing statistics. Then the statistics displayed in the display ip-pool max-usage command output will be accurate.

Statistics on the historical maximum usage of addresses in an IPv4 address pool cannot be restored after they are cleared. Exercise caution when running the reset ip-pool max-usage command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Clear the historical maximum usage of addresses in all IPv4 address pools.

<HUAWEI> reset ip-pool max-usage pool