reset mpls l2vpn hard-pipe statistics

Function

The reset mpls l2vpn hard-pipe statistics command deletes statistics about hard pipe traffic on the AC side.

This command is supported only on the NetEngine 8000 F1A.

reset mpls l2vpn hard-pipe statistics interface { interface-name | interface-type interface-number } [ outbound ]

reset mpls l2vpn hard-pipe statistics interface { interface-name | interface-type interface-number } [ inbound ]

Parameter	Description	Value
outbound	Specifies the outbound direction.	-
interface interface-name	Specifies the name of an interface.	The value is a string of 1 to 63 characters.
interface interface-type	Specifies the type of an interface.	-
interface interface-number	Specifies the number of an interface.	The value is a string of 1 to 63 characters.
inbound	Specifies the inbound direction.	-

User view

2: Configuration level

Task Name	Operations
qos	read

Usage Scenario

To delete statistics about hard pipe traffic on the AC side, run the reset mpls l2vpn hard-pipe statistics command.

Follow-up Procedure

Only the NetEngine 8000-F1A supports this command.

# Delete statistics about the upstream hard pipe traffic on the AC side.

<HUAWEI> reset mpls l2vpn hard-pipe statistics interface GigabitEthernet0/1/1 inbound