reset traffic-statistics suppression interface

Function

The reset traffic-statistics suppression interface command deletes statistics about Layer 2 traffic suppression on an interface.

reset traffic-statistics suppression interface { interface-name | interface-type interface-num } [ vsi vsi-name | bd bd-id ]

reset traffic-statistics suppression interface { interface-name | interface-type interface-num } vlan vlanid

Parameter	Description	Value
interface-name	Specifies an interface name.	-
interface-type	Specifies an interface type.	-
interface-num	Specifies an interface number.	-
vsi vsi-name	Specifies a VSI name.	The value is a string of 1 to 31 characters.
bd bd-id	Specifies a BDID.	The value is an integer ranging from 1 to 16777215.
vlan vlanid	Specifies a VLAN ID.	The value is an integer ranging from 1 to 4094.

User view

3: Management level

Task Name	Operations
vlan	read

Usage Scenario

To delete statistics about Layer 2 traffic suppression on an interface, run the reset traffic-statistics suppression interface command.

In VPLS scenarios, only AC-side traffic suppression statistics can be deleted. This command applies to GE sub-interfaces and Eth-Trunk sub-interfaces in VPLS scenarios.
In VLAN scenarios, this command applies to GE main interfaces and Eth-Trunk main interfaces.
In BD scenarios, only traffic suppression statistics on BD member interfaces can be deleted. This command applies to GE sub-interfaces and Eth-Trunk sub-interfaces in BD scenarios.

# Delete statistics about Layer 2 traffic suppression on GigabitEthernet0/1/0.1 in a BDID named 1.

<HUAWEI> reset traffic-statistics suppression interface GigabitEthernet 0/1/0.1 bd 1