remote-backup-profile (Interface view)

Function

The remote-backup-profile command binds an RBP to an interface.

The undo remote-backup-profile command unbinds an RBP from an interface.

By default, no RBP is bound to an interface.

Format

remote-backup-profile profile-name

undo remote-backup-profile profile-name

Parameters

Parameter	Description	Value
profile-name	Specifies the name of an RBP.	The value is a string of 1 to 128 case-insensitive characters. The name can only contain digits, letters, underscores (_), hyphens (-), and periods (.). It cannot contain spaces.

Parameter

Description

Value

profile-name

Specifies the name of an RBP.

The value is a string of 1 to 128 case-insensitive characters. The name can only contain digits, letters, underscores (_), hyphens (-), and periods (.). It cannot contain spaces.

Views

100GE-Trunk member Layer 2 interface view, 100GE-Trunk member interface view, Layer 2 100GE interface view, 100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 200GE sub-interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE-Trunk member Layer 2 interface view, 40GE-Trunk member interface view, Layer 2 40GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, FlexE sub-interface view, FlexE interface view, GE optical interface view, GE sub-interface view, GE interface view, GE electrical interface view, Global VE sub-interface view, Global VE interface view, VE sub-interface view, VE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rbs	write

Usage Guidelines

Usage Scenario

To apply an RBP to an interface, run the remote-backup-profile command to bind the RBP to the interface.

An RBP can be bound to a master interface or all sub-interfaces of one master interface, but an interface can be bound only with one RBP.

Prerequisites

The following operations have been performed:

1.Run the remote-backup-profile command in the system view to create an RBP.

2.Run the vrrp-id vrid interface interface-type interface-number command to bind the RBP to a specified VRRP group.

Precautions

The name of the RBP to be bound to an interface must be the same as the name of the RBP created using the remote-backup-profile command in the system view.

Example

# Bind the RBP named rpf to an interface.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/9
[~HUAWEI-GigabitEthernet0/1/9] vrrp vrid 1
[*HUAWEI-GigabitEthernet0/1/9] quit
[*HUAWEI] remote-backup-profile rpf
[*HUAWEI-rm-backup-prf-rpf] vrrp-id 1 interface GigabitEthernet0/1/9
[*HUAWEI-rm-backup-prf-rpf] quit
[*HUAWEI] interface GigabitEthernet 0/1/9
[*HUAWEI-GigabitEthernet0/1/9] remote-backup-profile rpf