remote-backup-profile (System view)

Function

The remote-backup-profile command creates an RBP and displays the RBP view. If a specified RBP already exists, this command directly displays the RBP view.

The undo remote-backup-profile command deletes a specified RBP.

By default, no RBP is created.

Format

remote-backup-profile profile-name

undo remote-backup-profile profile-name

Parameters

Parameter	Description	Value
profile-name	Specifies the name of an RBP.	The value is a string of 1 to 128 case-insensitive characters. The name can only contain digits, letters, underscores (_), hyphens (-), and periods (.). It cannot contain spaces.

Parameter

Description

Value

profile-name

Specifies the name of an RBP.

The value is a string of 1 to 128 case-insensitive characters. The name can only contain digits, letters, underscores (_), hyphens (-), and periods (.). It cannot contain spaces.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rbs	write

Usage Guidelines

Usage Scenario

An RBP provides a unified user interface for dual-device backup configurations. To create an RBP and display the RBP view, run the remote-backup-profile command.

Follow-up Procedure

Run the vrrp-id vrid interface interface-type interface-number command to bind the RBP to a specified VRRP group.

Example

# Create an RBP named rpf and display the RBP view.

<HUAWEI> system-view
[~HUAWEI] remote-backup-profile rpf