roam-domain(L2TP group view)

Function

The roam-domain command configures a roaming domain for an LNS.

The undo roam-domain command restores the default configuration.

By default, no roaming domain is configured for an LNS.

This command is supported only on the NetEngine 8000 F1A.

Format

roam-domain domain-name

undo roam-domain [ domain-name ]

Parameters

Parameter Description Value
domain-name

The domain name of LNS roaming domain must be an existing domain.

The value is a string of 1 to 64 characters.

Views

L2TP group view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
l2tp write

Usage Guidelines

To configure a roaming domain for an LNS, run the roam-domain command. When users of this LNS send packets carrying domain names that cannot be identified, the configured roaming domain can be used for these users for authentication.

Example

# Configure the roaming domain huawei for an LNS.
<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] domain huawei
[*HUAWEI-aaa-domain-huawei] commit
[~HUAWEI-aaa-domain-huawei] quit
[~HUAWEI-aaa] quit
[~HUAWEI] l2tp-group group1
[*HUAWEI-l2tp-group1] roam-domain huawei
Parent Topic: L2TP Access Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >