send-time daily

Function

The send-time command makes a key act as a send key for the specified interval of time.

By default, no send-time is configured.

Format

send-time daily start-time to end-time

undo send-time

Parameters

Parameter	Description	Value
start-time	Specifies the start send time.	In HH:MM format. The value ranges from 00:00 to 23:59.
to	Acts as a separator.	-
end-time	Specifies the end send time.	In HH:MM format. The value ranges from 00:00 to 23:59. The end-time should be greater than the start-time.
daily	Specifies the daily send timing for the given key.	-

Views

daily Key-ID view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
key-chain	write

Usage Guidelines

Usage Scenario

Each keychain consists of multiple key IDs that are valid within different time periods and each key ID is configured with an authentication algorithm. When a key ID becomes valid, the corresponding authentication algorithm is used, ensuring the dynamic change of authentication algorithms. Configure different key IDs for packet sending and receiving to be valid within different time periods.

Implementation Procedure

There are two keychain validity modes:

Absolute time range: In this mode, keychains are valid within a certain period and are invalid out of the period.
Periodic time range: In this mode, keychains are valid periodically. After one period ends, keychains continue to be valid within next period.
The mode in which key IDs for packet sending become valid must be identical with that configured for the keychain.

Precautions

Only one key ID is valid within a time period. In other words, the send time periods of different key-ids cannot overlap with each other.

Example

# Configure the send time with the timing mode as daily periodic.

<HUAWEI> system-view
[~HUAWEI] keychain huawei2 mode periodic daily
[*HUAWEI-keychain-huawei2] key-id 5
[*HUAWEI-keychain-huawei2-keyid-5] send-time daily 14:52 to 18:10