service-identify

Function

The service-identify command configures the service identification mode.

The undo service-identify command cancels the configured service identification mode.

By default, there is no service identification mode.

This command is supported only on the NetEngine 8000 F1A.

Format

service-identify { inner-vlan | outer-vlan | dscp | dhcp-option60 | vendor-class }

service-identify { 8021p { inner-vlan | outer-vlan } }

undo service-identify

Parameters

Parameter	Description	Value
inner-vlan	Indicates that services are identified based on the inner VLAN ID.	-
outer-vlan	Indicates that services are identified based on the outer VLAN ID.	-
dscp	Indicates that services are identified based on the DSCP value.	-
dhcp-option60	Indicates that services are identified based on the VENDOR-CLASS(DHCPv4 OPTION60/DHCPv6 OPTION16).	-
vendor-class	Indicates that services are identified based on the VENDOR-CLASS(DHCPv4 OPTION60/DHCPv6 OPTION16).	-
8021p	Indicates that services are identified based on the 802.1p field in the inner VLAN tag or the outer VLAN tag. The parameter is supported only on the admin VS.	-

Views

Service policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

After you create a service identification policy by using the service-identify-policy command in the system view, you must run the service-identify command to configure the service identification mode for the policy.

For single-tagged VLAN packets from users, services can be identified based on the inner VLAN ID or the 802.1p field in the inner VLAN tag.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure a service identification policy named test that identifies services based on the inner VLAN ID.

<HUAWEI> system-view
[~HUAWEI] service-identify-policy test
[*HUAWEI-serviceid-policy-test] service-identify inner-vlan