service-identify-policy ( bas interface view )

Format

service-identify-policy policy-name

undo service-identify-policy

Parameters

Parameter	Description	Value
policy-name	Specifies the name of a service identification policy.	The value is a string of 1 to 32 characters.

Parameter

Description

Value

policy-name

Specifies the name of a service identification policy.

The value is a string of 1 to 32 characters.

Views

BAS interface view (GE), BAS interface view (VE), BAS interface view (trunk)

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

In multi-play services, you can run the service-identify-policy command to identify Internet access traffic and to effectively manage bandwidth resources for such traffic.

Precautions

In VS mode, this command is supported only by the admin VS.

The NetEngine 8000 F supports service identification for IPoE, and IPoEoQ access users.

To delete a service identification policy that is applied, you need to check the detailed binding relationship of the policy by running the display service-identify-policy command. After removing all binding relationships, you can delete the service identification policy by running the undo service-identify-policy command.

Example

# Create a service identification policy named test and bind to BAS interface.

<HUAWEI> system-view
[~HUAWEI] service-identify-policy test
[~HUAWEI-serviceid-policy-test] quit
[~HUAWEI] interface GigabitEthernet0/1/19
[~HUAWEI-GigabitEthernet0/1/19] bas
[~HUAWEI-GigabitEthernet0/1/19-bas] access-type layer2-subscriber
[*HUAWEI-GigabitEthernet0/1/19-bas] commit
[~HUAWEI-GigabitEthernet0/1/19-bas] service-identify-policy test