service-location (System view)

Function

The service-location command creates a service-location backup group and displays the service-location backup group view.

The undo service-location command deletes a service-location backup group.

By default, no service-location backup group is configured.

This command is supported only on the NetEngine 8000 F1A.

Format

service-location service-location-id

undo service-location service-location-id

Parameters

Parameter	Description	Value
service-location-id	Specifies the ID of a service-location backup group.	The value is an integer ranging from 1 to 16. The value is an integer ranging from 1 to 16.

Parameter

Description

Value

service-location-id

Specifies the ID of a service-location backup group.

The value is an integer ranging from 1 to 16.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vsm-ha	write

Usage Guidelines

Usage Scenario

A service instance on a service board must be bound to a service-location backup group so that packets can be directed to the service board for service processing. The service-location command is the first step in basic service function configuration.

Follow-up Procedure

Run the display service-location command to view service-location backup group information.

Example

# Create a service-location backup group with ID 6.

<HUAWEI> system-view
[~HUAWEI] service-location 6
[*HUAWEI-service-location-6]