service-policy name

Function

The service-policy name command creates a value-added service policy template and enters the value-added service policy view.

The undo service-policy name command deletes a value-added service policy template.

By default, no value-added service policy is created.

This command is supported only on the NetEngine 8000 F1A.

Format

service-policy name policy-name [ portal | edsg | mirror ]

undo service-policy name policy-name [ portal | edsg | mirror ]

Parameters

Parameter	Description	Value
portal	Indicates a portal service policy.	-
edsg	Indicates an enhanced dynamic service gateway (EDSG) service policy.	-
mirror	Indicates a mirroring service policy.	-
name policy-name	Specifies the name of a value-added service policy.	The value is a string of 1 to 64 case-insensitive characters, which can be uppercase letters A to Z, lowercase letters a to z, digits 0 to 9, periods (.), hyphens (-), underscores (_), or their combinations.

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

To configure a service policy template, run the service-policy command. The services include EDSG and portal services. The EDSG service integrates multiple services, and the portal service forcibly directs users to a specified web page after the users log in to a device.

Precautions

A value-added service policy template must have a unique name on a device. Value-added service policy templates can define the same service type.

The maximum capacity allowed for a service policy template is 4096.

Example

# Create an EDSG service policy template named test and enter the service policy view.

<HUAWEI> system-view
[~HUAWEI] service-policy name test edsg

# Create a portal service policy template named test and enter the service policy view.

<HUAWEI> system-view
[~HUAWEI] service-policy name test portal