slot-warning-threshold
Function
The slot-warning-threshold command sets an alarm threshold for users allowed to access an interface board. If the percentage of users currently accessing the interface board reaches the threshold, an alarm is generated on the device.
The undo slot-warning-threshold command removes the alarm threshold set for users allowed to access an interface board.
By default, the alarm threshold is set to 100.
This command is supported only on the NetEngine 8000 F1A.
Parameters
| Parameter | Description | Value |
|---|---|---|
| threshold-value |
Alarm threshold. If the alarm threshold is set to 10, it indicates that if the percentage of the number of users currently accessing an interface board to the maximum number of users allowed to access the interface board reaches 10%, an alarm is generated on the . |
The value is in percentage, ranging from 1 to 100. |
Usage Guidelines
Usage Scenario
After you run this command, if the percentage of the number of users currently accessing an interface board to the maximum number of users allowed to access the interface board exceeds or reaches the set threshold, an alarm is generated.
NOTE: A dual-stack user will be counted as both an IPv6 user and an IPv4 user. This command only takes effect to the slots supported BAS function.Precautions
In VS mode, this command is supported only by the admin VS.