service deactivate-record

Function

The service deactivate-record command enables a device to record information about deactivating a service.

The undo service deactivate-record command disables a device to record information about deactivating a service.

By default, a device is enabled to record information about deactivating a service.

This command is supported only on the NetEngine 8000 F1A.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

service deactivate-record

undo service deactivate-record

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

To enable a device to record information about deactivating a service, run the service deactivate-record command. The recorded information helps diagnose faults.

Example

# Disable a device from recording information about failures to deactivate a service.

<HUAWEI> system-view
[~HUAWEI] undo service deactivate-record