service rate-limit-mode user-queue

Function

The service rate-limit-mode user-queue command configures a rate limit mode for EDSG service traffic.

The undo service rate-limit-mode command deletes a rate limit mode configured for EDSG service traffic.

The default rate limit mode is CAR.

This command is supported only on the NetEngine 8000 F1A.

Format

service rate-limit-mode user-queue { inbound | outbound }

undo service rate-limit-mode [ user-queue ] { inbound | outbound }

Parameters

Parameter	Description	Value
inbound	Indicates the upstream direction.	-
outbound	Indicates the downstream direction.	-
user-queue	Sets a rate limit mode for EDSG service traffic to user-queue.	-

Parameter

Description

Value

inbound

Indicates the upstream direction.

outbound

Indicates the downstream direction.

user-queue

Sets a rate limit mode for EDSG service traffic to user-queue.

Views

AAA domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

To configure a rate limit mode for EDSG service traffic in the upstream or downstream direction, run the service rate-limit-mode command.

Configuration Impact

After the service rate-limit-mode command is run, the configured rate limit mode is used for EDSG service traffic of users who go online from the AAA domain.

Example

# Set a rate limit mode for upstream service traffic to queue in the view of an AAA domain named default0.

<HUAWEI> system-view
[~HUAWEI] aaa
[*HUAWEI-aaa] domain default0
[*HUAWEI-aaa] commit
[~HUAWEI-aaa-domain-default0] service rate-limit-mode user-queue inbound