service volume-quota apply

Function

The service volume-quota apply command specifies the traffic direction to which the EDSG service quota applies.

The undo service volume-quota apply command restores the default traffic direction to which the EDSG service quota applies.

By default, the EDSG service quota applies to both upstream and downstream traffic.

This command is supported only on the NetEngine 8000 F1A.

Format

service volume-quota apply { inbound | outbound }

undo service volume-quota apply [ inbound | outbound ]

Parameters

Parameter	Description	Value
inbound	Indicates the upstream EDSG service traffic.	-
outbound	Indicates the downstream EDSG service traffic.	-

Parameter

Description

Value

inbound

Indicates the upstream EDSG service traffic.

outbound

Indicates the downstream EDSG service traffic.

Views

Prepaid profile view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

Carriers can carry out prepaid services for the upstream traffic, downstream traffic, or both upstream and downstream traffic. To specify the traffic direction to which the EDSG service quota applies, run the service volume-quota apply command.

Implementation Procedure

If the service volume-quota apply command is run more than once, the latest configuration overrides the previous one. Therefore, this command configuration takes effect for subsequent login users.

Configuration Impact

After this command is run, if the EDSG service quota is reduced, the reduced quota applies to the specified traffic direction but not to both upstream and downstream directions.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Apply the EDSG service quota to the downstream traffic of services bound to the prepaid profile prepaid_test1.

<HUAWEI> system-view
[~HUAWEI] prepaid-profile prepaid_test1
[~HUAWEI-prepaid-profile-prepaid_test1] service volume-quota apply outbound