tunnel-id

Function

The tunnel-id command configures a tunnel ID for a GMPLS UNI tunnel.

The undo tunnel-id command deletes the tunnel ID configured for a GMPLS UNI tunnel.

By default, no tunnel ID is configured for a GMPLS UNI tunnel.

Format

tunnel-id tunnel-id

undo tunnel-id

Parameters

Parameter	Description	Value
tunnel-id	Specifies the tunnel ID of a GMPLS UNI tunnel.	The value is an integer ranging from 1 to 32768.

Parameter

Description

Value

tunnel-id

Specifies the tunnel ID of a GMPLS UNI tunnel.

The value is an integer ranging from 1 to 32768.

Views

GMPLS tunnel view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
gmpls-te	write

Usage Guidelines

Usage Scenario

During GMPLS UNI tunnel configuration, the tunnel-id command must be used to configure a tunnel ID of the GMPLS UNI tunnel. A tunnel ID uniquely specifies a tunnel on a device. Tunnel IDs facilitate tunnel planning and management when GMPLS UNI tunnels are used.

Precautions

The tunnel-id command must be run before tunnel configurations are committed. Otherwise, no tunnel will be created.

Example

# Set the tunnel ID to 100 for a GMPLS UNI tunnel.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] gmpls-tunnel toRTC
[*HUAWEI-gmpls-tunnel-toRTC] tunnel-id 100