te-link

Function

The te-link command configures a TE-link for an LMP neighbor.

The undo te-link command deletes a TE-link configured for an LMP neighbor.

By default, no TE-link is configured for an LMP neighbor.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

te-link te-link-id

undo te-link te-link-id

Parameters

Parameter	Description	Value
te-link-id	Specifies the ID of a TE-link.	The value is an integer ranging from 1 to 1024.

Parameter

Description

Value

te-link-id

Specifies the ID of a TE-link.

The value is an integer ranging from 1 to 1024.

Views

LMP neighbor view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
lmp	write

Usage Guidelines

Usage Scenario

The device only supports static LMP. Static LMP can discover a TE-link and data-links between LMP neighbors only after the TE-link and data-links are configured.

Prerequisites

Static LMP has been enabled using the lmp static command.

Example

# Create a TE-link for an LMP neighbor.

<HUAWEI> system-view
[~HUAWEI] lmp
[*HUAWEI-lmp] peer rta
[*HUAWEI-lmp-peer-rta] lmp static
[*HUAWEI-lmp-peer-rta] te-link 1