set auto-upgrade model

Function

The set auto-upgrade model command enables or disables the automatic logic upgrade function for boards.

By default, the function of automatic logic upgrade is enabled for boards.

Format

set auto-upgrade model { open | cancel }

Parameters

Parameter	Description	Value
open	Enables automatic logic upgrade for boards.	-
cancel	Disables automatic logic upgrade for boards.	-

Parameter

Description

Value

open

Enables automatic logic upgrade for boards.

cancel

Disables automatic logic upgrade for boards.

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
config	write

Usage Guidelines

Usage Scenario

If the function is enabled, the system compares the logic version of a newly inserted board with the current system logic version or compares the log version of boards with a newly upgraded system logic version. If any difference is found, the logic version of the boards is updated.

By default, the function of automatic logic upgrade is enabled for boards.

In VS mode, this command is supported only by the admin VS.

Example

# Disable the automatic logic upgrade function for boards.

<HUAWEI> system-view
[~HUAWEI] set auto-upgrade model cancel
Please wait...
Info: Set auto-upgrade state success! 
Now the states is close.