snmp-agent trap(optical-module-abnormal)

Usage Scenario

This command enables the function to generate and report an alarm to the NMS when errors occur on an interface. After this function is enabled, the device sends an alarm to the NMS if the number of errors of a specific type on the interface reaches the threshold set for that type of errors. An alarm can be generated for multiple types of errors on an interface, including abnormal optical power of the optical module.

Configuration Impact

If the alarm function is disabled, the system does not generate any alarm, no matter whether the number of errors exceeds or falls below the set threshold. The configuration takes effect on all physical ports supporting the alarm function.

Precautions

In VS mode, this command is supported only by the admin VS.

• The snmp-agent trap disable port optical-module-abnormal command only disables a device from sending alarms generated due to optical module exceptions, or overhigh or overlow transmit or receive optical power.