isis ipv6 enable (SRv6 flow group view)

Function

The isis ipv6 enable command enables IS-IS IPv6 for an SRv6-TE flow group and associates the SRv6-TE flow group with a specified IS-IS process.

The undo isis ipv6 enable command disables IS-IS IPv6 for an SRv6-TE flow group and cancels the association between the SRv6-TE flow group and the specified IS-IS process.

By default, IS-IS IPv6 is disabled on an SRv6 TE flow group.

Format

isis ipv6 enable [ instanceId ]

undo isis ipv6 enable [ instanceId ]

Parameters

Parameter	Description	Value
instanceId	Specifies the ID of an IS-IS process.	The value is an integer ranging from 1 to 4294967295. The default value is 1.

Parameter

Description

Value

instanceId

Specifies the ID of an IS-IS process.

The value is an integer ranging from 1 to 4294967295. The default value is 1.

Views

SRv6 flow group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
teflowgroup	write

Usage Guidelines

Usage Scenario

To enable IS-IS to calculate IGP routes using the shortcut function of a statically configured SRv6 TE flow group, you need to run the isis ipv6 enable command to enable IS-IS IPv6 and associate the SRv6 TE flow group with a specified IS-IS process in the SRv6 TE flow group view after configuring the IS-IS process in the system view.

Example

# Enable IS-IS IPv6 for the SRv6 TE Flow Group.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] srv6-te flow-group flowgroup1
[*HUAWEI-segment-routing-ipv6-flow-group-flowgroup1] igp shortcut isis
[*HUAWEI-segment-routing-ipv6-flow-group-flowgroup1] isis ipv6 enable 1