isis ipv6 enable (SRv6 TE policy view)

Function

The isis ipv6 enable command enables IS-IS IPv6 for an SRv6 TE Policy and associates the SRv6 TE Policy with a specified IS-IS process.

The undo isis ipv6 enable command disables IS-IS IPv6 for an SRv6 TE Policy and cancels the association between the SRv6 TE Policy and the specified IS-IS process.

By default, IS-IS IPv6 is disabled on an SRv6 TE Policy.

Format

isis ipv6 enable [ instanceId ]

undo isis ipv6 enable [ instanceId ]

Parameters

Parameter	Description	Value
instanceId	Specifies the ID of an IS-IS process.	The value is an integer ranging from 1 to 4294967295. The default value is 1.

Parameter

Description

Value

instanceId

Specifies the ID of an IS-IS process.

The value is an integer ranging from 1 to 4294967295. The default value is 1.

Views

SRv6 TE policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
srpolicy	write

Usage Guidelines

Usage Scenario

To enable an SRv6 TE Policy to support IGP route advertisement through the shortcut function, after you complete IS-IS process configuration in the system view, run the isis ipv6 enable command to enable IS-IS IPv6 for the SRv6 TE Policy and associate the SRv6 TE Policy with a specified IS-IS process.

Example

# Enable IS-IS IPv6 for the SRv6 TE Policy.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] srv6-te policy a1 endpoint 2001:DB8:1::2 color 101
[*HUAWEI-segment-routing-ipv6-policy-a1] igp shortcut isis
[*HUAWEI-segment-routing-ipv6-policy-a1] isis ipv6 enable 1