shutdown (SRv6 TE Policy view)

Function

The shutdown command enables an SRv6 TE Policy.

The undo shutdown command disables an SRv6 TE Policy.

By default, the SRv6 TE policy is not shutdown.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

shutdown

undo shutdown

Parameters

None

Views

SRv6 TE policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
srpolicy	write

Usage Guidelines

Usage Scenario

To temporarily disable an SRv6 TE Policy, run the shutdown command. When needed, you can run the undo shutdown command to enable the SRv6 TE Policy again.

Example

# Close the SRv6 TE Policy.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] srv6-te policy policy1 endpoint 1::1 color 100
[*HUAWEI-segment-routing-ipv6-policy-policy1] shutdown