srv6-te flow-group

Function

The srv6-te flow-group command creates an SRv6 TE Flow Group and displays the SRv6-TE flow group view.

The undo srv6-te flow-group command deletes an SRv6 TE Flow Group.

By default, no SRv6 TE Flow Group is created.

Format

srv6-te flow-group group-name

undo srv6-te flow-group group-name

Parameters

Parameter	Description	Value
group-name	Specifies a name for an SRv6 TE Flow Group.	The value is a string of 1 to 31 case-sensitive characters. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

group-name

Specifies a name for an SRv6 TE Flow Group.

The value is a string of 1 to 31 case-sensitive characters. When double quotation marks are used around the string, spaces are allowed in the string.

Views

Segment routing IPv6 view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
teflowgroup	write

Usage Guidelines

Usage Scenario

To create an SRv6 TE Flow Group, run the srv6-te flow-group command. You can then add SRv6-TE Policies to the group to steer traffic into the SRv6 TE Policies based on DSCP values.

Example

# Create SRv6 TE Flow Group 1.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] srv6-te flow-group 1