srv6-te flow-group-number threshold-alarm

Function

The srv6-te flow-group-number threshold-alarm command configures an alarm threshold for the number of SRv6 TE flow groups. This configuration takes effect for all SRv6 TE flow groups.

The undo srv6-te flow-group-number threshold-alarm command restores the default alarm threshold for the number of SRv6 TE flow groups. This configuration takes effect for all SRv6 TE flow groups.

By default, the upper threshold is 80% and the lower threshold is 75%.

Format

srv6-te flow-group-number threshold-alarm upper-limit upperLimitValue lower-limit lowerLimitValue

undo srv6-te flow-group-number threshold-alarm [ upper-limit upperLimitValue lower-limit lowerLimitValue ]

Parameters

Parameter	Description	Value
lower-limit lowerLimitValue	Specifies the lower threshold (default value: 75).	The value is an integer ranging from 1 to 99, in percentage.
upper-limit upperLimitValue	Specifies the upper threshold (default value: 80).	The value is an integer ranging from 2 to 100, in percentage.

Parameter

Description

Value

lower-limit lowerLimitValue

Specifies the lower threshold (default value: 75).

The value is an integer ranging from 1 to 99, in percentage.

upper-limit upperLimitValue

Specifies the upper threshold (default value: 80).

The value is an integer ranging from 2 to 100, in percentage.

Views

Segment routing IPv6 view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
teflowgroup	write

Usage Guidelines

Usage Scenario

This command is used to configure an alarm threshold for the number of SRv6 TE flow groups. By default, the upper threshold is 80% and the lower threshold is 75%.

Example

# Set the upper and lower alarm thresholds for the number of SRv6 TE flow groups.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] srv6-te flow-group-number threshold-alarm upper-limit 90 lower-limit 70

# Restore the default alarm threshold for the number of SRv6 TE flow groups.

<HUAWEI> system-view
[~HUAWEI] segment-routing ipv6
[*HUAWEI-segment-routing-ipv6] undo srv6-te flow-group-number threshold-alarm