ssid

Function

The ssid command configures an (service set ID) SSID for WLAN services on a BAS interface. With this SSID, a fat access point (AP) can be connected to the BAS interface.

The undo ssid command deletes the SSID configured for WLAN services on a BAS interface.

By default, no SSID is configured on a BAS interface.

This command is supported only on the NetEngine 8000 F1A.

Format

ssid string-value

undo ssid

Parameters

Parameter	Description	Value
string-value	Indicates the service set ID.	The value is a string of 1 to 32 characters.

Parameter

Description

Value

string-value

Indicates the service set ID.

The value is a string of 1 to 32 characters.

Views

BAS interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

The ssid command enables SSID information to be contained in the authentication request packet sent from a specified interface to the RADIUS server and contained in the URL used for forcible web authentication redirection sent to the user.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure SSID CMCC-Starbucks on the BAS interface 0/1/1.1

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/1.1
[*HUAWEI-GigabitEthernet0/1/1.1] commit
[~HUAWEI-GigabitEthernet0/1/1.1] bas
[~HUAWEI-GigabitEthernet0/1/1.1-bas] access-type layer2-subscriber
[*HUAWEI-GigabitEthernet0/1/1.1-bas] commit
[~HUAWEI-GigabitEthernet0/1/1.1-bas] ssid cmcc