static-user detect interval

Function

The static-user detect interval command configures the interval at which the device detects whether static users are online.

The undo static-user detect interval command restores the default configuration.

By default, the device detects whether static users are online at an interval of 3 minutes.

This command is supported only on the NetEngine 8000 F1A.

Format

static-user detect interval interval-value

undo static-user detect interval

Parameters

Parameter	Description	Value
interval-value	Specifies an interval at which the device detects whether static users are online.	The value is an integer ranging from 1 to 60, in minutes.

Parameter

Description

Value

interval-value

Specifies an interval at which the device detects whether static users are online.

The value is an integer ranging from 1 to 60, in minutes.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

To change the interval at which the device detects whether static users are online, run the static-user detect interval command.

NOTE:

The static users in this scenario can be IPv4 static users who go online by sending ARP packets.

In the case of a large number of static users, set a larger interval to reduce the device burden. To trigger static users to go online, set a smaller interval.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the interval at which the device detects whether static users are online as 10 minutes.

<HUAWEI> system-view
[~HUAWEI] static-user detect interval 10