static-user interface-list

Function

The static-user interface-list command configures an access interface list for static users.

The undo static-user interface-list command deletes an access interface list of static users.

By default, no access interface list is configured for static users.

This command is supported only on the NetEngine 8000 F1A.

Format

static-user interface-list list-name

undo static-user interface-list list-name

Parameters

Parameter	Description	Value
list-name	Specifies the name of an interface list.	The value is a string of 1 to 32 case-insensitive characters.

Parameter

Description

Value

list-name

Specifies the name of an interface list.

The value is a string of 1 to 32 case-insensitive characters.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ipoe	write

Usage Guidelines

Usage Scenario

To allow multiple IPv4 static users on the same network segment to go online through multiple specified interfaces, run the static-user interface-list command to configure an access interface list. Then, run the interface command to bind a specified interface to the configured interface list.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Create an access interface list of static users named test and enter its view.

<HUAWEI> system-view
[~HUAWEI] static-user interface-list test
[*HUAWEI-static-user-interface-list-test]