static-user route-static urpf enable

Function

The static-user route-static urpf enable command enables URPF in static user+static route scenarios.

The undo static-user route-static urpf enable command restores the default configuration.

By default, URPF is disabled in static user+static route scenarios.

This command is supported only on the NetEngine 8000 F1A.

Format

static-user route-static urpf enable

undo static-user route-static urpf enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bras-control	write

Usage Guidelines

Usage Scenario

In static user+static route scenarios, if the next hop of the static route is the IP address of a session user who has the same MAC address as other session users, other session users fail to go online after the session user goes online. To resolve this issue, run the static-user route-static urpf enable command to enable URPF in static user+static route scenarios.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable URPF in static user+static route scenarios.

<HUAWEI> system-view
[~HUAWEI] static-user route-static urpf enable