te attribute enable

Function

The te attribute enable command enables TE.

The undo te attribute enable command disables TE.

By default, TE is disabled.

Format

te attribute enable

undo te attribute enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

Conventional MPLS TE applies to MPLS and SR-MPLS, but does not apply to SRv6. If TE is also required in SRv6, run the te attribute enable command. The TE feature enabled using this command also applies to MPLS and SR-MPLS.

If MPLS TE has been enabled, the device automatically converts existing MPLS TE-related configurations to all-round TE configurations when the te attribute enable command is run. After the command is run, you can perform new TE configurations.

When the undo te attribute enable command is run, the device automatically deletes the configuration of a TE function if the function is not enabled in MPLS and SR-MPLS, but reverts the function configuration back to the MPLS TE-specific configuration if the function is enabled in MPLS or SR-MPLS. If a function is specific to MPLS or SR-MPLS, the function configuration will not be converted to the new TE configuration when the te attribute enable command is run.

Precautions

MPLS TE-related commands apply only to MPLS TE and SR-MPLS TE. However, this command applies to SRv6 TE Policies, besides MPLS TE and SR-MPLS TE.

Example

# Enable TE globally.

<HUAWEI> system-view
[~HUAWEI] te attribute enable