te bandwidth (interface view)

Function

The te bandwidth command sets or modifies the bandwidth of BC0.

The undo te bandwidth command restores the default setting.

By default, no BC bandwidth is configured for a link.

Format

te bandwidth bc0Bw

undo te bandwidth

Parameters

Parameter	Description	Value
bc0Bw	Specifies the bandwidth of BC0.	The value is an integer ranging from 0 to 4000000000, in kbit/s.

Parameter

Description

Value

bc0Bw

Specifies the bandwidth of BC0.

The value is an integer ranging from 0 to 4000000000, in kbit/s.

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, GE optical interface view, GE sub-interface view, GE electrical interface view, GMPLS-UNI interface view, Tunnel interface view, XGE sub-interface view, XGE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

The te bandwidth command sets or modifies the bandwidth of a BC.

Precautions

MPLS TE-related commands apply only to MPLS TE and SR-MPLS TE. However, this command applies to SRv6 TE Policies, besides MPLS TE and SR-MPLS TE.

Example

# Set the bandwidth of BC0 to 1000 kbit/s.

<HUAWEI> system-view
[~HUAWEI] te attribute enable
[*HUAWEI] interface GigabitEthernet 0/1/0
[*HUAWEI-GigabitEthernet0/1/0] te bandwidth max-reservable-bandwidth 10000
[*HUAWEI-GigabitEthernet0/1/0] te bandwidth 1000