time-range qos-profile

Function

The time-range qos-profile command configures the time range during which a QoS profile takes effect.

The undo time-range qos-profile command cancels the configuration.

By default, this function is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

time-range qos-profile time-range-name profile-name

undo time-range qos-profile time-range-name

undo time-range qos-profile

Parameters

Parameter	Description	Value
time-range-name	Specifies the name of a time range. This time range must have been specified in the system view.	The value is a string of 1 to 31 characters.
profile-name	Specifies the name of a QoS profile. The QoS profile must have been created in the system view.	The value is a string of 1 to 63 characters.

Parameter

Description

Value

time-range-name

Specifies the name of a time range. This time range must have been specified in the system view.

The value is a string of 1 to 31 characters.

profile-name

Specifies the name of a QoS profile. The QoS profile must have been created in the system view.

The value is a string of 1 to 63 characters.

Views

AAA domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

This command can be used to configure the QoS profile to take effect during a time range for users in the AAA domain.

A QoS profile can be configured to take effect during multiple time ranges for users in an AAA domain.

Configuration Impact

The QoS profile specified by this command takes effect during the set time range.

The QoS profile that is not specified by this command takes effect during the time range excluding the set time.

Precautions

This command is supported only on the admin VS.

This command is invalid for VPN leased line users, Layer 2 leased line users, Layer 3 leased line users, or LNS users.

This command cannot be configured if a flow queue in four-flow-queue mode is configured in the specified profile.

The command cannot be configured while the qos-profile is in time-range mode.

The command cannot be configured while the qos-profile is in 8cos-enhance mode.

Example

# Configure a QoS profile to take effect during two time ranges range1 and range2.

<HUAWEI> system-view
[~HUAWEI] time-range range1 12:00 to 23:59 Mon
[*HUAWEI] time-range range2 09:00 to 21:00 working-day
[*HUAWEI] qos-profile 2m
[*HUAWEI-qos-profile-2m] car cir 2000
[*HUAWEI-qos-profile-2m] quit
[*HUAWEI] aaa
[*HUAWEI-aaa] domain domain1
[*HUAWEI-aaa-domain-domain1] commit
[*HUAWEI-aaa-domain-domain1] time-range qos-profile enable
[*HUAWEI-aaa-domain-domain1] time-range qos-profile range1 2m
[*HUAWEI-aaa-domain-domain1] time-range qos-profile range2 2m