traffic-policy network inbound(VSI view)

Function

The traffic-policy network inbound link-layer command applies a traffic policy in the VSI view.

The undo traffic-policy network inbound command cancels a traffic policy in the VSI view.

By default, no traffic policy is applied in the VSI view.

Format

traffic-policy policy-name network inbound link-layer

undo traffic-policy [ policy-name ] network inbound [ link-layer ]

Parameters

Parameter	Description	Value
policy-name	Specifies the name of a traffic policy.	The value is a string of 1 to 127 case-sensitive characters.

Parameter

Description

Value

policy-name

Specifies the name of a traffic policy.

The value is a string of 1 to 127 case-sensitive characters.

Views

VSI view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

To apply a traffic policy to the upstream public-network-side traffic on the tunnel outbound interface to which a VSI is bound, run the traffic-policy policy-name network inbound link-layer command in the VSI view.

In the VSI view, a traffic policy can be applied only to the upstream direction, and only Layer 2 rules can be matched. The following VSI types are not supported: PBB VPLS, BD VPLS and P2P VPLS.

Precautions

The VSI ACL does not support redirection, URPF, forwarding action priority adjustment, syslog, sampling, or load balancing. If any of these actions is configured in a traffic behavior of a traffic policy, this traffic policy cannot be applied to the VSI instance view.

Only the NetEngine 8000-F1A supports PBB VPLS.

Example

# Apply the traffic policy named abc in the VSI view.

<HUAWEI> system-view
[~HUAWEI] mpls
[~HUAWEI-mpls] quit
[~HUAWEI] mpls l2vpn
[~HUAWEI-l2vpn] quit
[~HUAWEI] traffic policy abc
[*HUAWEI-trafficpolicy-abc] quit
[*HUAWEI] vsi vsi1
[*HUAWEI-vsi-vsi1] traffic-policy abc network inbound link-layer