traffic select p2mp-te

Function

The traffic select p2mp-te command directs the multicast traffic out of a specified tunnel.

The undo traffic select p2mp-te command disables the traffic forwarding function.

By default, the direction control function does not exist.

Format

traffic select p2mp-te root-ip ip-address tunnel-id tunnel-id

undo traffic select p2mp-te root-ip ip-address tunnel-id tunnel-id

Parameters

Parameter	Description	Value
tunnel-id tunnel-id	Specifies the ID of a P2MP tunnel.	The value is an integer ranging from 1 to 65535.
root-ip ip-address	Specifies the root IP address of a P2MP tunnel.	The value is a unicast IP address in dotted decimal notation.

Parameter

Description

Value

tunnel-id tunnel-id

Specifies the ID of a P2MP tunnel.

The value is an integer ranging from 1 to 65535.

root-ip ip-address

Specifies the root IP address of a P2MP tunnel.

The value is a unicast IP address in dotted decimal notation.

Views

PIM view of a public network instance

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
pim	write

Usage Guidelines

Usage Scenario

If the multicast service is borne by the point-to-multipoint traffic engineering (P2MP TE) tunnel, the PIM function does not need to deployed on the transit nodes. To forward the multicast traffic to the right target on the leaf node of the tunnel, run the traffic select p2mp-te command to direct the multicast traffic out of a specified tunnel.

Precautions

The traffic select p2mp-te command can be only used to direct multicast traffic out of P2MP TE tunnel.
The traffic select p2mp-te command cannot be deployed in a private network.

Example

# Direct the multicast traffic out of a specified P2MP TE tunnel.

<HUAWEI> system-view
[~HUAWEI] multicast routing-enable
[*HUAWEI] pim
[~HUAWEI-pim] traffic select p2mp-te root-ip 10.0.0.1 tunnel-id 2