transceiver non-certified-alarm port-down enable

Function

The transceiver non-certified-alarm port-down enable command enables the function of setting interfaces with non-Huawei-certified optical modules inserted to Down.

The undo transceiver non-certified-alarm port-down enable command disables the function of setting interfaces with non-Huawei-certified optical modules inserted to Down.

By default, the function of setting interfaces with non-Huawei-certified optical modules inserted to Down is disabled.

Format

transceiver non-certified-alarm port-down enable

undo transceiver non-certified-alarm port-down enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
system	write

Usage Guidelines

Usage Scenario

When other vendors-certified optical module is inserted into a Huawei device interface and the interface is used for connection, to enable the function of setting the interface to Down, run the transceiver non-certified-alarm port-down enable command.

Example

# Enable the function of setting interfaces with non-Huawei-certified optical modules inserted to Down.

<HUAWEI> system-view
[~HUAWEI] transceiver non-certified-alarm port-down enable
Warning: After this command is run, the port that has a third-party optical module inserted will be forcibly set to Down. This operation may affect services. Continue? [Y/N]:y

# Disable the function of setting interfaces with non-Huawei-certified optical modules inserted to Down.

<HUAWEI> system-view
[~HUAWEI] undo transceiver non-certified-alarm port-down enable
Warning: After this command is run, the port that has a third-party optical module inserted will not be forcibly set to Down. Huawei will not be liable for any defects or service interruptions in the use of third-party optical modules. Continue? [Y/N]:y