transceiver non-certified-alarm disable

Function

The transceiver non-certified-alarm disable command disables alarm reporting for unauthenticated optical modules.

The undo transceiver non-certified-alarm disable command enables alarm reporting for unauthenticated optical modules.

By default, an alarm for unauthenticated optical modules is reported.

Format

transceiver non-certified-alarm disable

undo transceiver non-certified-alarm disable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
system	write

Usage Guidelines

Usage Scenario

When a third-party optical module authenticated by other vendors is inserted into a port, run the transceiver non-certified-alarm disable or undo transceiver non-certified-alarm disable command to disable or enable alarm (hwOpticalModuleIsNotAuthorized) reporting for the unauthenticated optical module.

Example

# Disable alarm reporting for unauthenticated optical modules.

<HUAWEI> system-view
[~HUAWEI] transceiver non-certified-alarm disable
Warning: After this command is run, no alarm is generated when a third-party optical module is installed. Huawei will not be liable 
for any problems or defects in the use of third-party optical modules! Continue? [Y/N]:y