tunnel avp46

Function

The tunnel avp46 command enables AVP46 on a tunnel to record the cause for the user log-out.

The undo tunnel avp46 command disables AVP46 on a tunnel.

By default, AVP46 is disabled on a tunnel.

This command is supported only on the NetEngine 8000 F1A.

tunnel avp46

undo tunnel avp46

None

L2TP group view

2: Configuration level

Task Name	Operations
l2tp	write

Usage Scenario

After the tunnel avp46 command is run, the CDN packet sent by a device to the peer contains the user-offline cause.

Precautions

In VS mode, this command is supported only by the admin VS.

# Enable AVP46 on a tunnel.

<HUAWEI> system-view
[~HUAWEI] l2tp-group test
[*HUAWEI-l2tp-test] tunnel avp46