tunnel load-balance by-tunnel

Function

The tunnel load-balance by-tunnel command enables tunnel load balancing based on the number of tunnels on tunnel boards bound to an LNS group.

The undo tunnel load-balance by-tunnel command disables tunnel load balancing among tunnel boards bound to an LNS group.

By default, tunnel load balancing is disabled among tunnel boards bound to an LNS group.

This command is supported only on the NetEngine 8000 F1A.

Format

tunnel load-balance by-tunnel

undo tunnel load-balance by-tunnel

Parameters

None

Views

LNS group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

Usage Scenario

When multiple tunnel boards are bound to an LNS group, to implement tunnel load balancing among the tunnel boards, run the tunnel load-balance by-tunnel command.

Configuration Impact

After the tunnel load-balance by-tunnel command is run, tunnels are preferentially established on the tunnel board that has the fewest tunnels.

Example

# Enable tunnel load balancing among tunnel boards bound to an LNS group.

<HUAWEI> system-view
[~HUAWEI] lns-group huawei
[*HUAWEI-lns-group-huawei] tunnel load-balance by-tunnel