tunnel load-balance by-session

Function

The tunnel load-balance by-session command enables tunnel load balancing based on the number of sessions on tunnel boards bound to an LNS group.

The undo tunnel load-balance by-session command restores the default configuration.

By default, tunnel load balancing based on the number of sessions on tunnel boards bound to an LNS group is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

tunnel load-balance by-session

undo tunnel load-balance by-session

Parameters

None

Views

LNS group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

Usage Scenario

When multiple tunnel boards are bound to an LNS group, to implement tunnel load balancing based on the number of sessions on tunnel boards bound to an LNS group, run the tunnel load-balance by-session command.

Configuration Impact

Tunnels are preferentially established on the tunnel board that has the fewest L2TP users in the LNS group.

Example

# Enable tunnel load balancing based on the number of sessions on tunnel boards bound to an LNS group.

<HUAWEI> system-view
[~HUAWEI] lns-group huawei
[*HUAWEI-lns-group-huawei] tunnel load-balance by-session