tunnel packet sccrp send delay

Function

The tunnel packet sccrp send delay command enables the LNS to delay sending SCCRP messages upon receipt of SCCRQ messages from the LAC.

The undo tunnel packet sccrp send delay command disables this function.

By default, the LNS is not enabled to delay sending SCCRP messages upon receipt of SCCRQ messages from the LAC.

This command is supported only on the NetEngine 8000 F1A.

Format

tunnel packet sccrp send delay delay-time

undo tunnel packet sccrp send delay delay-time

Parameters

Parameter	Description	Value
delay-time	Specifies a delay.	The value is an integer ranging from 500 to 1000, in milliseconds.

Parameter

Description

Value

delay-time

Specifies a delay.

The value is an integer ranging from 500 to 1000, in milliseconds.

Views

L2TP group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

Usage Scenario

In an L2TP access scenario, the LNS immediately responds with an SCCRP message for tunnel establishment upon receipt of an SCCRQ message from the LAC by default. To delay tunnel establishment, run the tunnel packet sccrp send delay command to enable the LNS to delay sending an SCCRP message based on the delay time in an LNS-delivered FES entry.

Configuration Impact

After the tunnel packet sccrp send delay command is run, the LNS delay sending SCCRP messages for tunnel establishment in accordance with the configured delay time.

Example

# Enable the LNS to delay sending SCCRP messages.

<HUAWEI> system-view
[~HUAWEI] l2tp-group g1
[*HUAWEI-l2tp-g1] tunnel packet sccrp send delay 700