tunnel packet sccrq send delay

Function

The tunnel packet sccrq send delay command enables the LAC in an L2TP group to send SCCRQ packets after a delay.

The undo tunnel packet sccrq send delay command disables the LAC in an L2TP group from sending SCCRQ packets after a delay.

By default, LACs do not send SCCRQ packets after a delay.

This command is supported only on the NetEngine 8000 F1A.

Format

tunnel packet sccrq send delay delay-time

undo tunnel packet sccrq send delay [ delay-time ]

Parameters

Parameter	Description	Value
delay-time	Specifies a delay.	The value is an integer ranging from 1 to 1000, in milliseconds.

Parameter

Description

Value

delay-time

Specifies a delay.

The value is an integer ranging from 1 to 1000, in milliseconds.

Views

L2TP group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

When the device functions as an LAC to interconnect with a non-Huawei device, by default, the LAC sends SCCRQ packets for tunnel establishment immediately after PPP negotiation is successful. To allow the LAC to send SCCRQ packets after a delay, run the tunnel packet sccrq send delay command.

Example

# Enable the LAC in L2TP group g1 to send SCCRQ packets after a delay of 200 ms.

<HUAWEI> system-view
[~HUAWEI] l2tp-group g1
[*HUAWEI-l2tp-g1] tunnel packet sccrq send delay 200