tunnel radius-force

Function

The tunnel radius-force command configures the forced tunnel authentication of RADIUS. If the RADIUS delivers the tunnel password attribute, the peer end will be authenticated.

The undo tunnel radius-force command deletes the forced RADIUS tunnel authentication.

By default, forced RADIUS tunnel authentication is not enabled in the L2TP group.

This command is supported only on the NetEngine 8000 F1A.

Format

tunnel radius-force

undo tunnel radius-force

Parameters

None

Views

L2TP group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

In forced RADIUS tunnel authentication, the attributes delivered by the RADIUS server determine whether to authenticate a tunnel. If the attributes delivered by the RADIUS server contain the tunnel password, the LNS or LAC authenticates the tunnel by using the password; otherwise, the LNS or LAC does not authenticate the tunnel.

Example

# Configure the force RADIUS tunnel authentication for the L2TP group huawei.

<HUAWEI> system-view
[~HUAWEI] l2tp-group huawei
[*HUAWEI-l2tp-huawei] tunnel radius-force