undo ipv6 redirect

Function

The undo ipv6 redirect command cancels the configuration.

Format

undo ipv6 redirect

Parameters

None

Views

Traffic behavior view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

A traffic behavior supports only one redirect configuration. Before configuring a new redirect command, delete the existing redirect configuration.

The undo ipv6 redirect command can be used to delete the redirect configuration.

-redirect ipv6-nexthop <ipv6-address> vpn <vpn-name> [ nqa <nqa-test-administer-name> <name-of-nqa-test-instance> ] [ routing-filter { default-routing | blackhole-routing } * ][ deny ][ pri-type common ]

redirect ipv6-nexthop <ipv6-address> nqa <nqa-test-administer-name> <name-of-nqa-test-instance> [ routing-filter { default-routing | blackhole-routing } * ][ deny ][ pri-type common ]
redirect ipv6-nexthop <ipv6-address> [ routing-filter { default-routing | blackhole-routing } * ][ deny ] [ pri-type common ]
redirect ipv6-nexthop <ipv6-address> interface { <interface-name> | <interface-type> <interface-number> } [ route-forward ] [ pri-type common ]
redirect ipv6-nexthop <ipv6-address> interface { <interface-name> | <interface-type> <interface-number> } [ pri-type common ]

Example

# In traffic behavior c1, cancel the configuration.

<HUAWEI> system-view
[~HUAWEI] traffic behavior c1
[*HUAWEI-behavior-c1] undo ipv6 redirect