trust upstream(AAA domain view)

Function

The trust upstream command binds a DS domain to an AAA domain to support BA classification and modify the priorities of IP packets and MPLS packets.

The undo trust upstream command unbinds a DS domain from an AAA domain.

By default, no DS domain is binded to an AAA domain.

This command is supported only on the NetEngine 8000 F1A.

Format

trust upstream { ds-domain-name | default }

undo trust upstream

Parameters

Parameter	Description	Value
ds-domain-name	Specifies the name of a DS domain. A DS domain consists of a group of connected DS nodes that provide the same service policy and implement the same PHB set.	The value is a string of 1 to 48 case-sensitive characters.
default	Specifies the default DS domain, which is predefined in the system.	-

Parameter

Description

Value

ds-domain-name

Specifies the name of a DS domain. A DS domain consists of a group of connected DS nodes that provide the same service policy and implement the same PHB set.

The value is a string of 1 to 48 case-sensitive characters.

default

Specifies the default DS domain, which is predefined in the system.

Views

AAA domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

To configure the traffic policy based on BA classification on an AAA domain (such as the priorities of IP packets and MPLS packets), you can configure a DS domain on the AAA domain and configure the mappings between priorities and DS domains.

Example

# Bind a DS domain to AAA domain.

<HUAWEI> system-view
[~HUAWEI] aaa
[*HUAWEI-aaa] domain 1
[*HUAWEI-aaa-domain-1] commit
[~HUAWEI-aaa-domain-1] trust upstream default