unr tag (IPv6 address pool view)

Function

The unr tag command configures a route tag for an IPv6 address pool in the IPv6 address pool view.

The undo unr tag command deletes the configured route tag.

By default, no route tag is configured.

This command is supported only on the NetEngine 8000 F1A.

Format

unr tag tag-value

undo unr tag [ tag-value ]

Parameters

Parameter	Description	Value
tag-value	Specifies the route tag for the IPv6 address pool.	The value is an integer ranging from 0 to 4294967295.

Parameter

Description

Value

tag-value

Specifies the route tag for the IPv6 address pool.

The value is an integer ranging from 0 to 4294967295.

Views

IPv6 address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ippool	write

Usage Guidelines

Usage Scenario

Configuring tags and using routing policies allows various user routes to be advised to specific networks. This command is used to configure a route tag for a single ip address pool.

Precautions

In VS mode, this command is supported only by the admin VS.

The UNR route tag configured using this command applies only to BRAS access users and not hybrid access users.

The unr tag command can be run only in the local, remote, delegation or relay address pool view.

Example

# Generate a UNR tag for the IPv6 address pool named huawei.

<HUAWEI> system-view
[~HUAWEI] ipv6 pool huawei bas local
Info: Create an ipv6 pool.
[*HUAWEI-ipv6-pool-huawei] commit
[~HUAWEI-ipv6-pool-huawei] unr tag 100